Boxzii for xbox 360

NOTE : Highly recommended remove top cover plate in Slim model !We are proud of present the coolest device for the XBOX 360 videogame console!
 * Enjoy HARD DRIVE CONNECTION or PC ISO Streaming 2IN1 solution and store all the disc game images supported...
 * Enjoy all the USB HD power inside your XBOX 360 , play games with ULTRAFAST loadings and avoid more then 75% of 3 RED LIGHTS OF DEATH posibilites and more...

 

Boxzii Features:

Boxzii Module 1 : Internal Mainboard + USB PC  Control Dongle
Xbox 360 XDG2/XGD3 Compatible
Supports Dash (2.13599) included
Supports FAT model consoles / AP25/AP26 Emulation
Supports SLIM consoles including 0225,etc.. drives
Plug and Play/Requires DVD Key
NO FLASHED DRIVE or JTAG EXPLOIT required
100% SOLDERLESS
USB 2.0 and ULTRAFAST LOADINGS
Avoid Overheating and >75% 3 Red lights of Death posibilites
Avoid tedious drive fw reflash
DVD/DL/Multigame compatible
Full upgradeable by USB/JTAGRemote ISO selector by Iphone/Ios/Android systems (Requires WIFI)

NOTE :  It's highly recommended do not use Boxzii for XBOX LIVE gaming mode, even the AP25 and other protections are supported, Microsoft is continuously upgrading XBOX360 detection methods for backup devices banning, USE BOXZII when PLAYING ONLINE  AT YOUR OWN RISK !!!!!  

Boxzii Module 2 : External Full Colour 2'2" TFT Touchscreen  panel for USB HDD/Pendrive (No PC required)
Full Colour 2'2" TFT Touchscreen
Full Colour touchscreen coverflow iso/config selection system
3Ports HUB included for USB HDD/Pendrive (No EXTRA Hub cost)
NTFS Filesystem supported
USB / SD upgrades for Actel and Microcontroller system
External SD socket (No needed disassembly if SD card replacement required)
Full clean installation / Place the module 2 whereever you want
Easy Installation/Just need plug USB cable from Boxzii Module 1 

BOXZII INSTALLATION :

1. DISASSEMBLY  XBOX 360 COVER / DESARMA LA CARCASA DE LA XBOX360
2. UNPLUG THE SATA FROM MOTHERBOARD AND  REPLUG IT SWITCHING THE CONNECTIONS
    BRIDGE DRIVE CONNECTIONS USING EXTRA SATA & POWER CABLES
    POWER/SATA from XBOX to BOXZII and OUTPUT Boxzii POWER/SATA to DRIVE
    DESCONECTA EL SATA DE LA PLACA MADRE ,y RECONECTALO INVIRTIENDO LAS CONEXIONES
    ENLAZA LOS POWER/SATA EXTRAS DEL LECTOR al lado TO DRIVE del boxzii y los provenientes
    desde la placa madre al MOTHERBOARD del Boxzii
3. TAKE SPECIAL CAREFULL OVER THE RIGHT CONNECTION FOR POWER CABLE SOCKETS
     ESPECIAL CUIDADO SOBRE LA POSICION DE POWERS EN LOS ZOCALOS
4. PLACE YOUR DRIVE AND STICK THE BOXZII MAINBOARD OVER IT USING DOUBLE TAPE
     IT'S PRETTY IMPORTANT ISOLATE UNDER AND OVER THE MAINBOARD TO AVOID SHORTCUTS
     PONER CINTA DE DOBLE PEGUE Y PEGAR SOBRE EL LECTOR,AISLA CON CINTA POR ENCIMA SI DESEAS
5. BLEND THE SMALL VIDEOCONNECTOR FLAPS AND PASS THROUGHT OUR USB DONGLE'S FLAT CABLE
    CURVA LAS PESTA?AS DEL VIDEOCONNECOTR Y PASA EL CABLE PLANO USB HACIA AFUERA
6. FINALLY PLUG THE FLAT CABLE INSIDE THE USB DONGLE SOCKET
    FINALMENTE CONECTA EL CABLE PLANO A LA PESTA?A DEL DONGLE USB Y FIJALO EN EL PUERTO
7. WE HIGHLY RECOMMEND REMOVE THE TOP COVER PLATE IN SLIM CONSOLE TO AVOID SHORTCIRCUITS/HEAT
    RECOMENDAMOS QUITAR LA HOJALATA DE LA CARCASA EN MODELO  SLIM PARA EVITAR CORTOCIRCUITOS


SPECIAL NOTE :
At this first software code version you must to have your drive's key/inquiry to make boxzii internal module working properly, please follow external instructions according your drive model to get them...
Once you have got your key/inquiry. Bin files just insert them over the same boxzii software folder and enjoy!